| Category |
Albums |
Files |
| User galleriesThis category contains albums that belong to Coppermine users. |
|
4 |
6 |
|
|
|
1 |
2 |
|
|
1 |
4 |
|
|
1 |
2 |
|
| 14 files in 7 albums and 5 categories with 1 comments viewed 414 times |
| Random files |
Leatherique "After" shot39 viewsAfter working over the seat with leatherique.
|
|
Ava on Poppy's Bike17 views
|
|
big garage, ready to be filled54 views
|
|
Back end of the E28 ///M529 viewsThis is just the other end of my M5 sitting in the MM shop.
|
|
The exposed switch8 viewsBe careful, the metal contacts and the little metal flaps on either side are loose in the housing. When you pop the top, they can fall out and will have to be found and carefully replaced.
|
|
7 views
|
|
This is the dastardly nib.12 viewsIt's this little bit of plastic that tends to break off. With the nib broken, it can't push down on the little metal rocker, which in turn cannot push down on the actual electrical switch.
|
|
The fixed nib13 viewsBe very careful not to lose the broken plastic that has the nib on it. You'll need to glue it back into place. If you've lost the plastic nib, you'll need to glue something else in its place to make contact with the metal rocker it sits above.
|
|
| Last additions |
7 viewsJan 08, 2010
|
|
big garage, filled72 viewsSep 25, 2009
|
|
big garage, ready to be filled54 viewsSep 25, 2009
|
|
both garages on side of house44 viewsSep 25, 2009
|
|
Ava on Poppy's Bike17 viewsSep 04, 2009
|
|
Back end of the E28 ///M529 viewsThis is just the other end of my M5 sitting in the MM shop.Jul 29, 2009
|
|
E28 ///M5 stock motor32 viewsThis was taken while at Metric Mechanic (4/11/09).
The new engine is in and being tuned right now. :)Jul 29, 2009
|
|
The fixed nib13 viewsBe very careful not to lose the broken plastic that has the nib on it. You'll need to glue it back into place. If you've lost the plastic nib, you'll need to glue something else in its place to make contact with the metal rocker it sits above.Jul 26, 2009
|
|
